ALGAECIDE LO – CHLOR 1lt

GENERAL INSTRUCTIONS

GENERAL INSTRUCTIONS
If algae is present prior to application, it is recommended that it is treated before adding Lo-Chlor Algaecide. Shock dose the pool with a suitable chlorine shock and run filtration for 24 hours.

Ensure bathing has ceased before applying this product.
Adjust pH to 7.0-7.2.
Clean pool thoroughly by brushing the walls and floor and vacuum these areas and filter as normal.
Following the dose rate table add the required dose to water in a suitable clean plastic bucket. With the circulation running evenly distribute around the pool.
Continue to circulate the pool water for 24 hours, do not add any other chemicals during this period.
Maintain pH between 7.2 – 7.6.
Bathing can resume after 1 full turnover of swimming pool water, typically 4-5 hours.
Caution: When dosing the product excessive copper concentrations may stain hair and swimwear as well as discolour pool surfaces!!

For perfect pool water, it is recommended that Lo-Chlor Algaecide is used in conjunction with one of our phosphate removal products such as Lo-Chlor Starver® and Starver® X. Removing phosphates, prior to adding Pool Algaecide, ensures the product remains effective for longer. REMEMBER NO PHOSPHATES = NO ALGAE.